MODEL:HSP-320 Single Output Switching Power Supply |
Features:
¡¤Universal AC input/ full range
¡¤Built-in active PFC function, PF>0.95
¡¤100% full load burn-in test
¡¤Protections: Short circuit/ Over load/ Over voltage/ Over temperature
¡¤Forced air cooling by built-in DC fan
¡¤Built-in fan speed control
¡¤Fixed switching frequency at 100KHz
¡¤1 year warranty
¡¤Dimensions: 215*115*50mm (L*W*H) |

casing No. : H007 |
|
|
MODEL |
HSP-320-5 |
HSP-320-7.5 |
HSP-320-12 |
HSP-320-13.5 |
HSP-320-15 |
HSP-320-24 |
HSP-320-27 |
HSP-320-48 |
|
OUTPUT |
DC Voltage |
5V |
7.5V |
12V |
13.5V |
15V |
24V |
27V |
48V |
|
Voltage Tolerance |
¡À2% |
¡À2% |
¡À1% |
¡À1% |
¡À1% |
¡À1% |
¡À1% |
¡À1% |
|
Rated Current |
55A |
40A |
25A |
22A |
20A |
13A |
11.7A |
6.7A |
|
Current Range |
0-55A |
0-40A |
0-25A |
0-22A |
0-20A |
0-13A |
0-11.7A |
0-6.7A |
|
Rated Power |
275W |
300W |
300W |
297W |
300W |
312W |
315.9W |
321.6W |
|
Ripple & Noise |
150mVp-p |
150mVp-p |
150mVp-p |
150mVp-p |
150mVp-p |
150mVp-p |
200mVp-p |
240mVp-p |
|
DC Adjustment Range |
¡À10% |
¡À20% |
-16%,+10% |
¡À11% |
-10%,+20% |
-16%,+10% |
-4%,+18% |
-15%,+17% |
|
Setup, Rise, Hold Time |
800ms,50ms,16ms/230VAC2500ms,50ms,16ms/115VAC at full load |
|
INPUT |
Voltage Range |
88¡«264VAC selected by 47¡«63 Hz£»120¡«370VDC |
|
Power Factor |
PF>0.95/230VAC,PF>0.98/115VAC at full load |
|
AC Current |
5A/115 VAC2.5A/230VAC |
|
Efficiency |
79% |
83% |
86% |
86% |
86% |
87% |
88% |
89% |
|
Inrush Current |
22A/115VAC40A/230VAC |
|
Leakage Current |
£¼1 mA/240VAC |
|
PROTECTION |
Over Load |
105%~135% |
|
Protection: Shut down o/p voltage, re-power on to recover |
|
Over Voltage |
115%~135% |
|
Protection type: Shut down o/p voltage, re-power on to recover |
|
Over Temp |
TSW1(Power transistor) When temp. in 80¡À5 ¡æ(70¡æ¡À5 ¡æ5V), shut down o/p voltage, temp. £¼80¡À5 ¡æ(70¡æ¡À5 ¡æ5V), O/I auto-recovery |
|
ENVIRONMENT |
Working Temp., Humidity |
-20¡æ¡«+65¡æ; 20%¡«90 %RH |
|
Storage Temp., Humidity |
-40¡æ¡«+85¡æ; 10%¡«95 %RH |
|
Vibration |
10¡«500Hz, 2G 10min./1cycle, period for 60min, each along X, Y, Z axes |
|
SAFETY |
Withstand Voltage |
I/P-O/P:3KVAC I/P-O/P:1.5KVAC O/P-FG: 0.5KVAC |
|
Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC |
|
STANDARD |
Safety Standard |
Design refer to UL60950,TUV EN60950 |
|
EMC Standard |
Design refer to EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11;ENV50204,EN55024 |
|
OTHERS |
Weight |
1.1Kg |
|
Packing |
12pcs/14.0Kg/0.98CUFT |
|
NOTE |
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25¡æ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12¡åtwisted pair-wire terminated with a 0.1¦Ì & 47¦Ì parallel capacitor.
3.Tolerance: includes set up tolerance, line regulation and load regulation.
4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.
|
 |