|
|||||||||||||||||||||||||||||||||||||||
MODEL:HVU-60 Single Output Waterproof Power Supply |
||||||
|
||||||
|
MODEL |
HVU-60-5 | HVU-60-12 | HVU-60-24 | |||
| OUTPUT |
DC VOLTAGE |
5¡À0.3V | 12¡À0.3V | 24¡À0.3V | ||
| Load Stability | ¡À2% | ¡À1% | ¡À0.5% | |||
| Enter-wire Stability | ¡À0.5% | ¡À0.5% | ¡À0.5% | |||
|
VOLTAGE TOLERANCE |
¡À2% | ¡À1% | ¡À1% | |||
|
RATED CURRENT |
10A | 5A | 2.5A | |||
|
CURRENT RANGE |
0-10A | 0-5A | 0-2.5A | |||
|
RATED POWER |
50W | 60W | 60W | |||
|
RIPPLE & NOISE |
80mVp-p | 100mVp-p | 100mVp-p | |||
|
SETUP,RISE, TIME |
500ms¡¢30ms¡¢80ms /230VAC 1200ms¡¢30ms¡¢15ms /115VAC FULL LOAD | |||||
| INPUT |
VOLTAGE RANGE |
88¡«264VAC 125¡«370VDC | ||||
|
AC CURRENT |
0.5A/ 230 V 1A/115V | |||||
|
EFFICIENCY |
78% | 82% | 84% | |||
|
INRUSH CURRENT |
COLD START 36A/230VAC | |||||
|
LEAKAGE CURRENT |
£¼2 mA/240VAC | |||||
| PROTECTION |
OVER LOAD |
110%-180% | ||||
| Protection£ºHiccup mode,recovers automatically after fault condition is removed | ||||||
| OVER VOLTAGE | 5.75-6.75V | 13.8-16.2V | 27.6-32.4V | |||
|
Protection£ºHiccup mode,recovers automatically after fault condition is removed | ||||||
| ENVIRONMENT | Working Temp., Humidity |
-20¡æ¡«+70¡æ£»20%¡«90 %RH (Refer to output load derating curve) | ||||
Storage Temp., Humidity |
-40¡æ¡«+85¡æ£»10%¡«95 %RH | |||||
Vibration |
10¡«500Hz£¬2G 10min./1cycle£¬period for 60 min£¬each along X.Y.Z axes |
|||||
| SAFETY | Withstand Voltage |
I/P-O/P:1.5KVAC I/P-FG: 1.5KVAC O/P-FG:0.5KVAC |
||||
Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC |
|||||
| STANDARD | Safety Standard |
EN61347-1 EN61347-2-13 IP67 | ||||
EMC Standard |
EN55015 EN61547 EN 61000-3-2 EN61000-3-3 | |||||
| OTHERS | Weight |
| ||||
Packing |
| |||||
| NOTE |
1.All parameters NOT specially mentioned are measured at 230VAC input, | |||||
